TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 396 of 508
TM 9--2520--215--34
0074 00--14
LOW AND REVERSE RANGE PLANETARIES AND RELATED PARTS REPAIR
– CONTINUED
0074 00
ASSEMBLY – Continued
13. Coat bore of low range pinions (19) with oil soluble grease. Insert steel tube (32) into bore. Install 22 spindle
rollers (20).
14. Install two thrust washers (21) on each side of pinion (19). Retain two thrust washers (21) with oil soluble grease
to make pinion assembly (34).
15. Remove steel tube (32). Install pinion assembly (34) into carrier (28). Align pinion by inserting steel tube (32) into
carrier and pinion bore.
Back to Top
