TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 403 of 508
TM 9--2520--215--34
0075 00--1
OUTPUT PRESSURE AND BRAKE COOLANT PUMP AND OUTPUT
DRIVESHAFT REPLACEMENT
0075 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Lifting sling (item 13, WP 0088 00)
Materials/Parts
Gasket (item 75, WP 0087 00)
Lockwasher (8) (item 99, WP 0087 00)
Non--hardening gasket sealant (item 7, WP 0085 00)
Rope (item 11, WP 0085 00)
Equipment Conditions
Low range planetary carrier assembly removed
(WP 0073 00)
Shims, steer bevel gear and thrust washer removed
(WP 0018 00)
REMOVAL
1. Remove eight output pressure and brake coolant pump mounting bolts (1) and eight lockwashers (2). Install two
mounting bolts (1) in threaded holes (3) for use as jacking bolts to loosen output pressure and brake coolant
pump. Attach rope sling to support weight of output drive shaft assembly. Discard lockwashers.
Back to Top
