TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 408 of 508

TM 9--2520--215--34

0075 00--6

OUTPUT PRESSURE AND BRAKE COOLANT PUMP AND OUTPUT

DRIVESHAFT REPLACEMENT – CONTINUED

0075 00

INSTALLATION – Continued

5. Use 1/2--inch guide bolts to install right bearing retainer (5) with right bearing outer race (16).

6. Install 12 bolts (4). Tighten 12 bolts (4) evenly while checking to ensure drive shaft (10) remains free. Remove

rope sling.

NOTE

FOLLOW--ON MAINTENANCE:

Install low range planetary carrier assembly

(WP 0073 00)

Install shims, steer bevel gear and thrust

washer (WP 0018 00)

END OF WORK PACKAGE