TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 414 of 508

TM 9--2520--215--34

0076 00--6

OUTPUT PRESSURE AND BRAKE COOLANT PUMP ASSEMBLY REPAIR –

CONTINUED

0076 00

ASSEMBLY – Continued

3. Install brake coolant pump cover assembly (14) with six cap screws (12) and six new lockwashers (13).

4. Install key (10) into slot on shaft of center idler gear (15). Install two output pressure pump gears (9).

9

10

15

5. Install output pressure pump cover (5) with four cap screws (3) and four new lockwashers (4).

6. Install external drive gear (2) onto splined shaft of internal gear.