TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 420 of 508

TM 9--2520--215--34

0077 00--4

OUTPUT DRIVE SHAFT AND RELATED PARTS REPAIR – CONTINUED

0077 00

DISASSEMBLY – Continued

NOTE

Do not remove roller bearing from bevel--driven gear unless replacement is necessary.

Perform Step 9 if replacement is necessary.

Do not remove spanner nuts from drive shaft unless replacement is necessary.

9. Support flat side of gear and drive bearing (15) off. Insert drift through holes in gear web and drive against race.

CLEANING

See WP 0018 00 for cleaning procedures.

INSPECTION

See WP 0018 00 for general inspection and repair recommendations.