TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 425 of 508
TM 9--2520--215--34
0077 00--9
OUTPUT DRIVE SHAFT AND RELATED PARTS REPAIR – CONTINUED
0077 00
ASSEMBLY -- Continued
6. Install four lock rings (1), wrapping each counterclockwise into groove in four spanner nuts (2) (viewed from
short--splined end of shaft). Stake spanner nut (2) over lock ring (1) at several points around nut circumference.
7. Install inner bearing ring (13) with bearing into steer bevel gear (10).
Back to Top
