TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005
TM-9-2520-215-34

  TM-9-2520-215-34 - Page 399 of 508

TM 9--2520--215--34
0074 00--17
LOW AND REVERSE RANGE PLANETARIES AND RELATED PARTS REPAIR
– CONTINUED
0074 00
ASSEMBLY – Continued
22. Install assembled low range ring gear (10) and reverse range sun gear (14), sun gear down. Press ball bearing
(13) onto hub of reverse range planetary carrier assembly (11).
NOTE
Splines must fit between splines in reverse range planetary carrier, and low range pinions
must mesh with low range ring gear.
23. Position low range planetary carrier assembly (8), splined hub down, and press into reverse range planetary
carrier assembly (11).
24. Turn assembly over and support low range planetary carrier assembly (8). Record gear mounting dimension
(MD) etched on web of bevel gear. Press assembled main bearing and support (2) onto hub of reverse range
carrier assembly (11).


Back to Top