TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005
TM-9-2520-215-34

  TM-9-2520-215-34 - Page 437 of 508

TM 9--2520--215--34
0078 00--9
TRANSMISSION HOUSING ASSEMBLY AND STEERING COMPONENTS
REPLACEMENT – CONTINUED
0078 00
INSTALLATION – Continued
3. Install steer--cross shaft drive gear assembly (34). Install new preformed packing (44) onto air tube assembly
(20). Install air tube assembly (20) into pump port (45).
4. Install flywheel (24), temporarily starting two bolts (22) to align steer--cross shaft gear assembly (34) with flywheel
(24). While flywheel (24) is suspended from hoist, install steer--cross shaft (25).


Back to Top