TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 441 of 508

TM 9--2520--215--34

TRANSMISSION HOUSING ASSEMBLY AND STEERING COMPONENTS

REPLACEMENT – CONTINUED

0078 00

11. Install left steering drive pinion (12) and bearing (11).

12. Install left steering tie shaft pinion (10) with shoulder (47) facing out. Install bearing (9).

NOTE

It is important that pilot be as near as possible to inside circumference of governor ring

without interfering with rotation. This ensures maximum governor pressure.

13. Install two tube fittings (19), pilot tube assembly (18) with two bolts (16) and two new lockwashers (17). Install

governor oil line (15).

NOTE

FOLLOW--ON MAINTENANCE:

Install left and right steer clutch assemblies

(WP 0038 00)

END OF WORK PACKAGE

0078 00--13/14 blank