TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 240 of 418

TM 9-2520-246-34-1

2-21. ASSEMBLY OF SUBASSEMBLIES.

The following paragraphs give instructions

to assemble the transmission transfer subassemblies.

NOTE

Keep all parts clean and protected from dust and

dirt.

Coat all bearings with multipurpose lubri-

cant during assembly.

Coat shafts and bores of

gears with white lead pigment during assembly.

Use new seals and snaprings during assembly.

a.

Rear Output Shaft Assembly.

FRAME 1

1.

Put in key (1).

2.

Aline key (1) with keyway in driven gear (2). Set up hydraulic press

as shown.

3.

Press in rear output shaft (3).

GO TO FRAME 2

2-220