TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 290 of 418

TM 9-2520-246-34-1

FRAME 3

1.

Take out six capscrews (1) and six lockwashers (2). Take off rear output shaft

rear bearing retainer (3).

2.

Subtract 0.005-inch from dial indicator reading in step 4 of frame 2. The

difference is the thickness of shims (4) needed.

3.

Put on shims (4) and rear bearing retainer (3). Aline all screw holes and put

six capscrews (1) and six lockwashers (2).

4.

Evenly tighten six capscrews (1) to 60 to 77 pound-feet.

GO BACK TO FRAME 2

in

2–270