TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 295 of 418

TM 9-2520-246-34-1

m.

Front Output Case Assembly (Model T- 136-27).

FRAME 1

1.

Put shifter shaft spring (1) with two spring caps (2) on hole (3).

2.

Aline three taper pin holes in gasket (4) and front output case (5)

pins (6) in transfer case cover (7).

3.

Put gasket (4) and front output case (5) in place. Make sure that

goes in shifter shaft spring (1) and hole (3).

with three taper

shifter shaft (8)

4.

Put in ten capscrews (9) and ten lockwashers (10) and evenly tighten

capscrews to 45 to 55 pound-feet.

END OF TASK

2-275