TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 304 of 418

TM 9-2520-246-34-1

a.

Neutral Position.

FRAME 1

1.

2.

3.

4.

Push shifter shaft (1) all the way in.

Pull shifter shaft (1) out until you feel it go into the first detent.

Turn input shaft (2) by hand.

Front output shaft (3) and rear output shaft

(4) should not turn.

If rear output shaft (4) turns, do the following:

a.

Remove top cover and shifter shaft. Refer to para 2-14k, frame 2.

b.

Replace top cover and shifter shaft. Refer to para 2-22d, frame 3.

If front output shaft (3) turns, do the following:

a.

b.

c.

END OF

Remove front output case assembly. For model T-136-27, refer to

para 2-14d.

For model T-136-21, refer to para 2-14f.

Make sure that all parts are free to turn in front output case assembly.

Replace front output case assembly.

For model T-136-27, refer to

para 2-22m.

For model T-136-21, refer to para 2-22k.

TASK

2-284