TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 306 of 418

TM 9-2520-246-34-1

c.

Low Range Position.

FRAME 1

1.

2.

3.

4.

Pull shifter shaft (1) all the way out.

Turn input shaft (2) by hand.

Rear output shaft (3) should turn. Front output shaft

(4) should not turn.

If rear output (3) does not turn, do the following:

a.

Remove top cover and shifter shaft. Refer to para 2-14k, frame 1.

b.

Replace top cover and shifter shaft. Refer to para 2-22d, frame 1.

If front output shaft (4) turns, do the following:

a. Remove front output case assembly. For model T-136-27, refer to

para 2-14d.

For model T-136-21, refer to para 2-14f.

b.

Make sure that all parts are free to turn in front output case assembly.

c. Replace front output case assembly. For model T-136-27, refer to

para 2-22m.

For model T-136-21, refer to para 2-22k.

END OF TASK

2-286