TM-9-2520-246-34-1
TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C
TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL
JANUARY 1981
TM-9-2520-246-34-1 - Page 305 of 418
TM 9-2520-246-34-1
b.
High Range Position.
FRAME 1
1.
2.
3.
4.
5.
Push shifter shaft (1) all the way in.
Turn input shaft (2) to the right by hand.
Rear output shaft (3) should turn and f rent output shaft (4) should not turn.
If rear output shaft (3) does not turn, do the following:
a.
Remove top cover and shifter shaft.
Refer to para 2-14k, frame 1.
b.
Replace top cover and shifter shaft.
Refer to para 2-22d, frame 2.
If front output shaft (4) turns, do the following:
a.
Remove front output case assembly. For model T-136-27, refer to
para 2-14d.
For model T-136-21, refer to para 2-14f.
b.
Make sure that all parts are free to turn in front output case assembly.
c.
Replace front output case assembly. For model T-136-27, refer to
para 2-22m.
For model T-136-21, refer to para 2-22k.
END OF TASK
2-285
Back to Top
