TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 301 of 418

TM 9-2520-246-34-1

FRAME 3

Soldier A 1.

Put deflector (1) and companion flange (2) on input shaft (3).

2.

Using adjustable wrench as shown, hold companion flange (2).

Soldier B 3.

Working at front of transfer (4), put washer (5) and slotted nut (6)

on input shaft (3) and tighten nut to 300 to 400 pound–feet.

4.

Tighten slotted nut (6) until slot is alined with cotter pin hole in

shaft.

5.

Put in cotter pin (7).

6.

Working at rear of transfer (4), do steps 3 through 5 again for

rear output shaft flange (8).

END OF TASK

2-281