TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 459 of 933

TM 9-2520-270-34

15. INSTALL NEW PREFORMED

PACKING (1) ON SHAFT (2).

a. Coat new preformed packing (1) with

transmission oil.

b. Put preformed packing (1) on

shaft (2).

17. SECURE SHAFT (2).

a. Coat threads of bolt (7) with sealant

compound and install bolt.

18. USING 3/8-INCH DRIVE TORQUE

WRENCH WITH ADAPTER, TORQUE

BOLT (7) TO 110-135 in-lb

(127-155 cmkg).

19. ROTATE GEAR (3) TO BE SURE

IT MOVES FREELY.

a. If gear (3) moves freely, go to

END OF TASK. If not, go to step 1.

16. INSTALL GEAR (3).

a. Slide gear (3) into housing (4).

b. Aline center hole of bearings (5) with

shaft hole (6).

c. Install shaft (2).

END OF TASK

4-147