TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 451 of 933

TM 9-2520-270-34

4. POSITION TRANSMISSION (1).

a. Tilt transmission (1) up slightly.

WARNING

Power takeoff assembly can

fall when screws are removed.

Injury to personnel can occur.

5. REPAIRER AND HELPER REMOVE

POWER TAKEOFF ASSEMBLY (2).

a.

b.

c.

d.

(H) Hold assembly (2) in place.

Remove 11 screws (3) and

washers (4) from outside of

assembly (2). Remove 6 screws (3)

and washers (4) from inside of

assembly. Discard any lock washers.

Repairer and helper remove

assembly (2).

Remove and discard housing input

gasket (5).

GO TO NEXT PAGE

Change

1

4-140.1 (4-140.2 blank)

NOTE

Early transmission have lock washers and

grade 5 bolts. Later transmissions have flat

washers and grade 8 bolts.

Transmissions must

be reassembled with same type washers and

bolts as removed.