TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 446 of 933

TM 9-2520-270-34

REPAIR INPUT BEVEL HOUSING INSERTS

This task consists of subtasks that identify the two possible types of inserts used. Each subtask gives

location and size of inserts, part or item number of tools and kits, and working dimensions. To remove,

repair, and install inserts, identify type of insert used and refer to either Replace Inserts, page 2-171 or

Replace Helical Coil Inserts, 2-166.

Subtask

Repair Input

Repair Input

Page

Bevel Housing Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-138

Bevel Housing Helical Coil Inserts . . . . . . . . . . . . . . . . . . . . . . .

4-138.1

REPAIR INPUT BEVEL HOUSING INSERTS

(NON-HELICAL COIL)

Tools:

Materials/Parts:

General mechanic’s tool kit:

Sealant compound – (Item 11, App B)

automotive – (Item 33, App C)

Transmission oil – (Item 12, App B)

Industrial goggles — (Item 39, App C)

Inside/outside indicator caliper —

Personnel Required:

(Item 41, App C)

Portable electric drill —

(Item 58, App C)

Screw threading set —

Track Veh Rep 63H10

Equipment Conditions:

(Item 65, App C)

Input bevel housing on workbench.

Socket wrench set – (Item 88, App C)

See page 4-126.

Transmission insert repair kit —

(Item 103, App C)

CAUTION

Compressed air source, 30 psi (207 kPa)

Insert must be replaced with same type as

maximu m

removed or damage to equipment can occur.

4-138

Change

3