TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 598 of 933

TM 9-2520-270-34

2. REMOVE LIFTING EYE (1).

a. Remove two screws (2) and lock

washers (3). Discard lock washers.

b. Remove eye (1).

4. ATTACH LIFTING DEVICE (9)

ASSEMBLY (10).

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

5. REMOVE OUTPUT HOUSING (6).

a.

b.

c.

Loosen output housing (6) using

pry point (11).

Evenly lift output housing (6).

Remove and discard gasket (12).

Lower output housing (6) onto

work surface.

3. REMOVE SCREWS (4) AND (5) FROM

RIGHT-HAND OUTPUT HOUSING (6).

a. Remove four screws (4) and lock

washers (7). Discard lock washers.

b. Remove 22 screws (5) and lock

washers (8). Discard lock washers.

GO TO NEXT PAGE

4-271

TO REMOVAL