TM-9-2520-272-34P

CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A

TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

TM-9-2520-272-34P - Page 148 of 488

TM 9-2520-272-34&P

4-18.

INSTALL TRANSMISSION TOP COMPONENTS

(SHEET 3 OF 16)

NOTE

Lifting brackets must be removed from

transmission.

1 lnstall clean governor screen assembly (1),open end

first, into bore in top of center housing (2).

2 Using screwdriver, install four 5/16-18 x 3 inch guide

pins (3) in four bolt holes (4).

3

Install oil transfer plate gasket (5) on center housing

(2) over four guide pins (3).

Go to Sheet 4

4-82

Para. 4-18, Task 1