TM-9-2520-272-34P
CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A
TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2520-272-34P - Page 17 of 488
TM 9-2520-272-34&P
HOW TO USE THIS MANUAL (Continued)
REFERENCES TO OTHER PUBLICATIONS
Appendix A provides a reference list of other manuals or publications which may provide
additional information for your maintenance tasks.
REPAIR PARTS AND SPECIAL TOOLS LIST
Appendix B lists and illustrates all of the parts of the transmission; codes parts for
procurement, level of maintenance and level of disposal when an item is no longer serviceable;
lists and illustrates special tools; contains a National Stock Number (NSN) index and a part
number index. A description of each section of the RPSTL is provided on page B-1 in the
manual.
How to Use the RPSTL for Maintenance Procedures. The RPSTL is designed so that you can
find parts whether you know the NSN, the manufacturer’s part number, or if you have no
identification number.
If you know the NSN, go to RPSTL page I-1, locate the NSN and obtain the Figure and Item
numbers shown for that NSN. Next, go to the illustrated parts in Section II of the RPSTL.
Parts are grouped by function and they are illustrated in consecutively numbered figures. Go
through the illustrations until you come to a page with your figure number shown at the bottom
of the illustration.
Next, look at the illustration and find the item number you want in the callouts. Verify that the
item number you obtained points to the part you want in the illustration. If it does, then go to
the printed page following the illustration and, using your item number, find the SMR code
(explained on page B-2), FSCM code (explained on page B-5), manufacturer's part number, name
of the part and quantity used.
For example, suppose that you know that the NSN of a part is 5330-00-001-4904 and you need
more information about the part.
Go to page I-1 and find 5330-00-001-4904 in the column under the heading “STOCK NUMBER.”
To the right of the STOCK NUMBER column there are two columns, one headed FIG. and the
other ITEM. Look to the right of your number 5330-000-001-4904 and see 16 in the FIG. column
and 12 in the ITEM column. You now need to locate Figure 16, Item 12 in the illustrated parts
list.
Go back to Section II where parts are illustrated and locate the illustration with “Figure 16.
Forward Clutch” under the picture. Find item number 12 in the illustration and see if it looks
like the part you want. If item 12 does not look like the part you want, you may have a wrong
NSN, or you need to recheck the index to make sure you obtained the correct figure and item
number for NSN 5330-00-001-4904.
ix
Back to Top
