TM-9-2520-272-34P
CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A
TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2520-272-34P - Page 8 of 488
TM 9-2520-272-34 & P
Heavy parts must be lifted using sling and hoist.
To avoid injury, keep clear of parts at all times.
Do not
let parts swing freely during hoisting.
Do not rotate transmission on maintenance stand with input housing removed.
Bevel gear assembly will
fall and could cause injury.
Hot parts can burn you.
Always wear leather gloves when working with parts that are or might be hot.
Frozen parts can stick to your fingers and cause serious injury.
Always wear leather gloves when working
with parts that have been frozen in dry ice.
Tribasic sodium phosphate can burn eyes and cause skin irritation.
Do not get in eyes, on skin or on
clothing.
Avoid breathing dust.
Keep container closed.
Use with adequate ventilation.
Wash thoroughly
after handling.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
Call
a physician.
Flush skin with water.
Wash clothing before reuse.
b
Change 2
Back to Top
