TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 344 of 620

TM 9-2520-272-40

0043

NOTE

Left side of center housing has outer race and rollers. This is for bearing on range input drive

gear. This bearing can be disassembled into two pieces and is a matched set consisting of

an inner race and an outer race and rollers. Do not replace this outer race and rollers unless

you replace the inner race of the related bearing. Refer to Replace Range Input Gears and

Hydrostatic Drive Gear (WP 0037) for removal of the inner race for range input gear.

3. Apply heat to center housing (Figure 1, Item 2) with heat gun near outer race and rollers (Figure 1, Item 1)

for one hour.

4. Remove outer race and rollers (Figure 1, Item 1).