TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 341 of 620

TM 9-2520-272-40

0042

3. Turn input housing assembly (Figure 4, Item 4) over, outside up.

4. Install new O-ring (Figure 4, Item 2) on plug (Figure 4, Item 5).

5. Apply petrolatum to O-ring (Figure 4, Item 2).

6. Install plug (Figure 4, Item 5) into input housing assembly (Figure 4, Item 4).

7

. Torquep

lug(F

igure4

,I

tem5)to40to50lb-

f

t(54to68N·m)

.

8. Apply sealant to threads of two pipe plugs (Figure 4, Item 1) and (Figure 4, Item 6).

9. Install pipe plugs (Figure 4, Item 1) and (Figure 4, Item 6) in input housing assembly (Figure 4, Item 4).

10.Torque plugs (Figure 4, Item 1) and (Figure 4, Item 6) to 8 to 10 lb-ft (11 to 14 N·m).

11. Install new O-ring (Figure 4, Item 2) and (Figure 5, Item 2) on steering adjustment access plug (Figure 4,

Item 3) and (Figure 5, Item 3).

12.Apply petrolatum to O-ring (Figure 4, Item 2).

13.Install plug (Figure 4, Item 3) in input housing assembly (Figure 4, Item 4).

14

.Torquep

lug(F

igure4

,I

tem3)to50to60lb-

f

t(68to81N·m)

.