TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 338 of 620

TM 9-2520-272-40

0042

NOTE

Input housing assembly does not have to be removed from the transmission to do maintenance

procedures provided in this work package, except for removal and installation of f at aluminum

plug.

However, text and illustrations in this work package are based upon the input housing assembly

being removed from the transmission.

DISASSEMBLE INPUT HOUSING ASSEMBLY

NOTE

Input housing assembly is turned outside up.

1. Remove steering adjustment access plug (Figure 1, Item 3) and O-ring (Figure 1, Item 2) from input housing

assembly (Figure 1, Item 4). Discard O-ring (Figure 1, Item 2).

2. Remove pipe plug (Figure 1, Item 1) from input housing assembly (Figure 1, Item 4).

3. Remove pipe plug (Figure 1, Item 6) from input housing assembly (Figure 1, Item 4).

4. Remove pipe plug (Figure 1, Item 5) and O-ring (Figure 1, Item 2) from input housing assembly (Figure 1,

Item 4). Discard O-ring (Figure 1, Item 2).