TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 330 of 620

TM 9-2520-272-40
0041
NOTE
Examine input housing seal. It is not necessary to remove seal unless defective. If seal is
defective, go to Steps 10 and 11. If seal is serviceable, go to Step 12.
10.Turn input housing (Figure 5, Item 3) over, bell housing down.
11. Using hammer and center punch, drive against wall of input housing seal (Figure 5, Item 15) in two places
about 180 degrees apart. Push seal (Figure 5, Item 15) down into bell housing area.


Back to Top