TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 321 of 620
TM 9-2520-272-40
0039
25.Install a pry bar (Figure 22, Item 6) between two studs on top of the converter pump cover assembly (Figure 22,
Item 1), if necessary, to keep the cover from turning when you install self-locking nuts (Figure 22, Item 8).
26.Install 24 new self-locking nuts (Figure 22, Item 8) on the converter pump housing studs (Figure 22, Item 21)
that attach the converter pump cover assembly (Figure 22, Item 1).
27.Torque 24 nuts (Figure 22, Item 8) to 19 to 23 lb-ft (26 to 31 N·m).
Back to Top
