TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 318 of 620
TM 9-2520-272-40
0039
NOTE
Balance marks are used on the clutch backing plate and on the converter pump housing. Install
the clutch backing plate so that these two balance marks are aligned, as shown in Figure 18.
17.Install the clutch backing plate (Figure 19, Item 11) on the torque converter turbine assembly (Figure 19, Item
14) and on the converter pump assembly (Figure 19, Item 17) studs so that the balance marks align.
Back to Top
