TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 326 of 620

TM 9-2520-272-40

0040

Assemble Stator Group

1. Install retaining ring (Figure 5, Item 20) into stator (Figure 5, Item 19).

2. Install clutch disk (front stator washer) (Figure 5, Item 18).

3. Install race (Figure 5, Item 17) and bearing (Figure 5, Item 16).

4. Install thrust washer (Figure 5, Item 15).

5. Install race (Figure 5, Item 11).

6. Install cam (Figure 5, Item 12).

7. Use petrolatum to hold parts in position and install 12 springs (Figure 5, Item 13) and rollers (Figure 5, Item

14) into cam (Figure 5, Item 12) in position shown in illustration. The open end of the spring touching the

roller must be toward the center of cam (Figure 5, Item 12). Rollers (Figure 5, Item 14) are installed in the

shallow ends of cam (Figure 5, Item 12) pockets.

8. Install thrust washer (Figure 5, Item 10).

9. Install rear stator washer (Figure 5, Item 9).

10.Install retaining ring (Figure 5, Item 8).