TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 325 of 620

TM 9-2520-272-40

0040

Disassemble Stator Group

1. Remove retaining ring (Figure 4, Item 8) from stator (Figure 4, Item 19).

2. Pull up on race (Figure 4, Item 9). Remove rear stator washer (Figure 4, Item 9).

3. Remove thrust washer (Figure 4, Item 10).

NOTE

Springs and rollers will fall free from cam when race is removed.

4. Remove race (Figure 4, Item 11). Springs (Figure 4, Item 13) and rollers (Figure 4, Item 14) will fall free from

cam (Figure 4, Item 12). Remove cam (Figure 4, Item 12).

5. Remove thrust washer (Figure 4, Item 15).

6. Remove bearing (Figure 4, Item 16) and race (Figure 4, Item 17).

7. Remove clutch disk (front stator washer) (Figure 4, Item 18).

8. Remove retaining ring (Figure 4, Item 20).