TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 346 of 620
TM 9-2520-272-40
0043
10.Use wrench pliers to remove two headless straight pins (Figure 4, Item 9) from front side of center housing
(Figure 4, Item 2).
11. Remove two headless straight pins (brake reaction pins) (Figure 5, Item 10) from right side of center housing
(Figure 5, Item 2).
12.Remove two headless straight pins (dowels pins) (Figure 5, Item 13) from right side of center housing (Figure
5, Item 2).
13.Remove one headless straight pin (dowel pin) (Figure 5, Item 14) from right side of center housing (Figure
5, Item 2).
14.Remove needle roller bearing (Figure 5, Item 12) from right side of center housing. Remove thrust washer
(Figure 5, Item 11).
Back to Top
