TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 444 of 620

TM 9-2520-272-40

0056

REMOVE RANGE PACK

NOTE

Transmission is on maintenance stand, left end up.

Procedures for installing the fabricated range pack retaining fx

tureareg

iveninWP0055

.

1. Remove bolt (Figure 1, Item 7) that holds previously installed fabricated retaining f xture (Figure 1, Item 2) to

center housing (Figure 1, Item 1).

2. Turn forward clutch housing assembly (Figure 1, Item 6) so that one opening that has slots (Figure 1, Item 3) is

positioned over pitot (Figure 1, Item 5).

3. Remove two screws (Figure 1, Item 4).

4. Remove pitot (Figure 1, Item 5).

NOTE

Refer to WP 0051 for repair of forward clutch housing assembly.

5. Remove forward clutch housing assembly (Figure 1, Item 6). Move forward clutch housing assembly (Figure 1,

Item 6) back and forth to free it, if necessary.