TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 439 of 620

TM 9-2520-272-40
0054
12.Install the range input shaft (Figure 13, Item 2) and attached parts into the rear carrier drum (Figure 13, Item 5).
13.Install the center carrier assembly (Figure 13, Item 6) on the range input shaft (Figure 13, Item 2).
14.Install the front internal gear (Figure 13, Item 3) with the larger end pointing down, onto the range input shaft
(Figure 13, Item 2).
15.Install the retaining ring (Figure 13, Item 4).
16.Install new two seal rings (Figure 13, Item 1) onto the range input shaft (Figure 13, Item 2).


Back to Top