TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 441 of 620

TM 9-2520-272-40

0055

SUSTAINMENT MAINTENANCE

INSTALL/REMOVE FABRICATED RANGE PACK RETAINING FIXTURE

INITIAL SETUP:

Tools and Special Tools

Retaining Fixture (WP 0075, Item 1)

Tool Kit, General Mechanic’s (GMTK) (WP 0079,

Item 45)

Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft

(WP 0079, Item 51)

Personnel Required

Track Vehicle Repairer, 91H10

Equipment Condition

Transmission removed from vehicle or container (TM

9-2350-277-13&P)

Oil f ll tube assembly removed (WP 0006)

Left cover assembly removed (WP 0033)

INSTALL FABRICATED RANGE PACK RETAINING FIXTURE

NOTE

Retaining f xture is installed to prevent range pack from shifting when transmission is rotated.

1. Align hole in retaining f xture (Figure 1, Item 1) with one of three left cover bolt holes (Figure 1, Item 3) located

nearest to forward clutch housing assembly (Figure 1, Item 2).

2. Install 3/8-16 x 3/4 in. bolt (Figure 1, Item 5) and 3/8 in. washer (Figure 1, Item 4) in selected bolt hole (Figure

1, Item 3).

3

. Torquebo

l

t(F

igure1

,I

tem5)to27to32lb-

f

t(37to43N·m)

.