TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 435 of 620
TM 9-2520-272-40
0054
Assemble Input Shaft Components
NOTE
Do not remove bearing unless replacement is necessary.
1. Remove bearing (Figure 7, Item 20) from the shaft of the rear carrier assembly (Figure 7, Item 18). Discard
bearing (Figure 7, Item 20).
2. Install new bearing (Figure 7, Item 20) on the rear carrier assembly (Figure 7, Item 18). Push the bearing so
that it touches the shoulder of the shaft and bushing assembly (Figure 7, Item 21).
Back to Top
