TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 70 of 620
TM 9-2520-272-40
0007
2. Put top cover (Figure 3, Item 4) on transmission.
3. Install f fteen 5/16-18 x 3-1/2-inch machine bolts (Figure 3, Item 3) to attach top cover (Figure 3, Item 4) to
transmission.
4. Install two 5/16-18 x 1-3/4-inch machine bolts (Figure 3, Item 1) to attach top cover (Figure 3, Item 4) to
transmission.
5. Install nine 5/16-18 x 2-inch machine bolts (Figure 3, Item 2) to attach top cover (Figure 3, Item 4) to
transmission.
6. Torque machine bolts (Figure 3, Item 1) and (Figure 3, Item 2) and (Figure 3, Item 3) to 13 to 15 lb-ft (18
to 20 N·m).
Back to Top
