TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 77 of 620
TM 9-2520-272-40
0008
9. Install 5/16-18 x 3 inch bolt (Figure 4, Item 8) and washer (Figure 4, Item 6.
10.Install 5/16-18 x 3-1/4 inch bolt (Figure 4, Item 7) and washer (Figure 4, Item 6).
NOTE
The f nal retaining 5/16-18 x 2 3/4 inch bolt and washer for the main control valve assembly is
installed later with wiring harness ground connector.
11. Make sure no bolt has been installed in ground connector location (Figure 4, Item 4). Torque two bolts (Figure
4, Item 7) and (Figure 4, Item 8) to 17 to 20 lb-ft (23 to 27 N·m).
Back to Top
