TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 81 of 288
TM 9-2540-207-14&P
5-37
Vent Fan Driver Board (Continued)
Figure 5.6-21
Detail, Removal of Printed Circuit Board Connector
electrostatic damage to electronic components.
3.
Using a #1 cross-tip screwdriver, remove two (2) flat-head screws that hold the printed
circuit board to the Vent Fan Housing.
Vent Fan Driver Boards (Continued)
Figure 5.6-22 Detail, Vent Fan Driver Board Screw Locations
5.6.5.2.2 Installation
1.
Apply Dow Corning 340 Heat Sink Compound to the mounting bracket surface of the
printed circuit board assembly.
Back to Top
