TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 71 of 288
TM 9-2540-207-14&P
5-27
5.6.3
Vent Fan Shroud
Figure 5.6-12 Vent Fan Shroud
5.6.3.1 Removal
During the following operations take care not to damage the electronic boards.
1.
Remove Vent Fan Assembly in accordance with the appropration section of 5.6.1
depending on the design iteration.
2.
Using a 1/4" socket or 1/4" nut driver, remove four (4) hex-head screws to detach the
Dual Air Adapter.
Note: The Dual Air Adapter gasket should remain affixed to the Dual Air
Adapter. Use Silicone RTV to re-attach, if required.
3.
Using a #2 cross-tip screwdriver, remove three (3) flat-head screws from the front face of
the Vent Fan Shroud.
Electronic circuit boards may be damaged.
Back to Top
