TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 63 of 288
TM 9-2540-207-14&P
5-19
Vent Fan Assembly Procedure for Design Iteration 3 (Continued)
3.
Disconnect
Wiring Harness
connection
J11
to the Vent Fan Driver Board.
Figure 5.6-5 Vent Fan Assembly
Note: To release the small Logic connector J13, use a 1/8"
flat blade
screwdriver.
unscrewing the connector.
4.
Disconnect
Wiring Harness
connection
J13
to the Electronic Programmed Controller
Board by carefully putting the blade of the screwdriver between the connector sections.
Gently pull up on the connector while using the blade of the screwdriver to aid in
separating the halves of the connector.
Back to Top
