TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 62 of 288
TM 9-2540-207-14&P
5-18
5.6.1.2 Vent Fan Assembly Repair Procedure For Design Iteration 3 Only. (Refer to
Section 5.6.1.1 for Design Iterations 1 and 2)
Figure 5.6-4 Vent Fan Assembly
5.6.1.2.1 Removal
During the following operations take care not to damage the electronic boards.
Note: It is NOT necessary to remove the Dual Air Adapter for this
operation.
1.
Remove Top Shell (ref. 5.4.2).
2.
Remove Bottom Shell (ref. 5.4.3).
Note: Power Connector J11 is released by pressing the sides of
the connector together with your fingers releasing the locking
tabs, and gently pulling apart the two halves.
J11 Power
Connector
J13 Logic Connector
(to left of J11 Power
Connector)
Combustion Air
Inlet
Combustion Air
Duct
Back to Top
