TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 67 of 288
TM 9-2540-207-14&P
5-23
5.6.2 Motor Magnet
The motor magnet is located at the end of the motor assembly and is designed to use magnetic
coupling in order to drive the Fuel Shaft located in the combustor assembly. If the motor magnet
should require replacement, follow the procedures detailed in the next sections.
Figure 5.6-9 Motor Magnet
5.6.2.1 Removal
!CAUTION!
When handling electronic circuits, personnel must be electrically grounded to avoid
electrostatic damage to electronic components.
During the following operations take care not to damage the electronic boards.
Vent Fan Assembly PC Board Shown is
for Design Iterations 1 & 2. PC Board for
Design Iteration 3 will be different. Refer
to section 5.2. for more information
regarding design iterations.
Back to Top
