TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 417 of 779

Remov e

1. Support ball bearing in press

2. Press drive hub from ball bearing.

Remove

Install

1. Support drive hub in press.

1. Remove retaining ring (A) from housing assembly.

2. Press ball bearing on drive hub using a suitable hollow

2. Remove intermediate clutch diet (B) from housing.

3. Remove drive disc (C) from housing.

tool the size of the inner race.

Install

Figure 6-144. Removing or installing ball

1. Position drive diet (C) in housing assembly.

bearing from drive hub.

2. Position intermediate clutch disc (B) in housing.

3. Install retaining ring (A) in housing.

6-12 3

Figure 6-145. Removing or installing

intermediate clutch and

drive discs.