TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 408 of 779

Figure 6-125. Pressing fan driven gearshaft

from upper gearshaft ball bearing.

Note. The oil restrictor must be identified

with, and kept with the housing from which it

was removed. If restrictors are installed in

housings not requiring them, or conversely ,

serious clutch damage will result.

Figure 6-127. Removing or installing front

fan drive housing oil restrictor (engines

having oil restrictors).

(2)

Clutch assembly.

Disassemble piston

actuated and mechanical clutch assemblie s

following instructions which accompany figures

6-130 through 6-147.

Figure 6-126. Pressing fan driven gearshaft

from lower driven gearshaft ball bearing.

6-114