TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 398 of 779

Disconnect

1. Position auxiliary oil filter in arbor press and com-

press retainer as shown using suitable blocks (A).

2. Remove cotter pin (B) and remove filter from arbor

press.

Connect

1. Position auxiliary oil filter in arbor press and com-

press retainer as shown using suitable blocks (A).

2. Install cotter pin (B) and remove filter from arbor

press.

Figure 6-110. Disconnecting or connecting

auxiliary oil filter element retainer

and bushing .

Remove

1. Remove bushing (A), spring, and retainer from

support.

2. Remove and discard oil filter element (B).

Note.

Do not remove support or handle from

filter cover unless inspection (para 6-38c )

indicates replacement is necessary.

Install

1. Position a new auxiliary oil filter element (B) on

cover.

2. Position retainer, spring, and bushing (A) on support.

Figure 6-111. Removing or installing

auxiliary oil filter element.

b. Cleaning.

Refer to paragraph 6-2. Make

certain all oil passages (fig. 6-112) are clear and

not obstructed.

6-104