TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 388 of 779

Remove

1. Remove pressure oil pickup screen assembly (A).

2. Remove and discard gasket (B).

Install

1. Position a new pressure oil pickup screen assembly

gasket (B) on oil pan.

2. Position pressure oil pickup screen assembly (A) on oil

pan.

Figure 6-93. Removing or installing pressure

oil pickup screen assembly (universal

vehicle application engines).

Remove

1. Remove oil pump elbow adapter (A).

2. Remove and discard gasket (B).

3. Remove and discard two preformed packings (C).

Install

1. Position two new preformed packings (C) in oil pump

elbow adapter (A).

2. Position a new adapter gasket (B) on oil pan.

3. Position elbow adapter (A) on oil pan.

Figure 6-94. Removing or installing oil pump

elbow adapter.

6-94