TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 384 of 779

Remove

1. Remove two self-locking nuts (A).

2. Remove oil separator drain replacement cover (B).

Remove and discard gasket.

3. Remove three self-locking nuts (C).

4. Remove oil level indicator replacement cover (D).

Remove and discard gasket.

5. Remove pipe plug (E).

Install

1. Install pipe plug (E).

2. Position a new oil level indicator replacement cover

gasket on oil pan. Position oil level indicator

replacement cover (D) on oil pan.

3. Install three self-locking nuts (C).

4. Position a new oil separator drain replacement cover

gasket on oil pan. Position oil separator drain

replacement cover (B) on oil pan.

5. Install two self-locking nuts (A).

Figure 6-89. Removing or installing oil separator drain and oil

level replacement covers.

6-9 0