TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 392 of 779

Remove

1. Remove main oil cooler bypass valve plug (A) and

gasket (B).

2. Remove and discard gasket (B).

3. Remove bypass valve spring (C).

Install

1. Install bypass valve spring (C) in damper and oil filter

housing.

2. Position a new bypass valve plug gasket (B) on bypass

valve plug (A).

3. Install plug (A) in housing.

Figure 6-100. Removing or installing main

oil cooler bypass valve.

Figure 6-99. Removing or installing main oil

cooler bypass valve plug, gasket, and spring.

6-98