TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 383 of 779

6-37. Overhaul of Oil Pan Assembly

instructions

which accompany figures 6-8 8

a. Disassembly.

Disassemble oil pan following

through 6-97 .

Remove

1. Cut locking wire and remove 13 cap screws (A).

2. Remove left oil pan baffle (B).

3. Cut locking wire and remove 12 cap screws (C).

4. Remove right oil pan baffle (D).

5. Remove pipe plug (E).

Install

1. Install pipe plug (E).

2. Position right oil pan baffle (D) in oil pan.

3. Install 12 cap screws (C) and install locking wire

securing screws.

4. Position left oil pan baffle (B) in oil pan.

5. Install 13 cap screws (A) and install locking wire

securing screws.

Figure 6-88. Removing or installing oil pan baffles.

6-8 9